EcoFlow Power Stations are portable, rechargeable power sources that have become increasingly popular in recent years. They are designed to provide a reliable power supply when access to the grid is limited or unavailable. Whether you are using your EcoFlow Power Station as a backup power source, for outdoor activities or even in your RV, there are some things you should know to get the most out of your investment.
Connect to a Digital Voltage Stabiliser
One of the ways to ensure that you get the most out of your EcoFlow Power Station is by connecting it to a digital voltage stabiliser. This device stabilises the voltage output, which is especially helpful when using the unit for extended periods or if you are away from home for some time and your EcoFlow needs to charge and discharge itself. This helps to maintain the health of your power station and avoid any damage.
Consider a Surge Protector
If you don’t have a digital voltage stabiliser, consider investing in a surge protector with a delay in it. A surge protector is a cost-effective way to protect your power station from power surges, and the delay feature helps to ensure that the unit isn’t overloaded when the power comes back on. Try to get the maximum delay possible for your unit, ideally, one that can last up to seven minutes to provide adequate protection.
Unplug During Power Outages
When there’s a power outage, it’s safest to unplug your EcoFlow Power Station from the charging source. This prevents any fluctuations in the power supply from damaging the unit. Instead, plug in all the devices you want to use into the EcoFlow, wait for seven to ten minutes, and then connect the power station back to charge.
Keep it Cool
It’s best to store and use your EcoFlow Power Station between 20-25 degrees Celsius. This helps maintain the battery life and ensures the unit operates optimally. Some models come with a heat warning light to help you monitor the temperature.
Avoid Full Charges
It’s best to charge your EcoFlow Power Station up to 85%. This helps to prevent overcharging, which can damage the battery and reduce the unit’s lifespan. You can also set this limit on the app so that it will stop charging at the desired percentage.
Don’t Completely Discharge
Refrain from discharging your EcoFlow Power Station to less than 30% remaining. This helps to protect the battery and extend the unit’s lifespan. Running your unit to 0% regularly can damage the battery.
Proper Storage
If you’re storing your EcoFlow Power Station for a long time, charge it up to 60%, then discharge down to 30% and store it at 30% charge. This should be done every three months to maintain battery health.
Mind The Power Limits
Most EcoFlow Power Stations can handle devices with a draw current of 600W, which means you can use three 200W devices simultaneously. However, it’s important to note that the unit will surge at 1200W and 1800W in X-Boost mode. To maintain the longest battery life, ensure that your total power draw does not exceed the nominal rating of the unit.
Qualified Electrician
If you decide to wire your EcoFlow Power Station to your DB board, ensure that it is done by a qualified electrician for insurance purposes. This ensures that the wiring is done correctly and there’s no electrical hazard risk.
In conclusion, following these tips will help you get the most out of your EcoFlow Power Station. By taking proper care of your power station, you’ll ensure that it lasts longer, performs optimally and provides reliable power whenever you need it.
